Current Insights on Neoplasms and Adequate Dental Care for Patients with Oral Cancer / Actualización sobre Neoplasmas y su Correcta Atención Odontológica en Pacientes con Cancer Oral

The present study aimed to review the literature on the main complications of antineoplastic therapies and the degree of knowledge of dental surgeons about these complications. A bibliographic search was conducted in the main health databases PUBMED (www.pubmed.gov) and Scholar Google (www.scholar.google.com.br), in which studies published from 1987 to 2023 were collected. Laboratory studies, case reports, systematic and literature reviews, which were developed in living individuals, about the main neoplastic genes and their relationship with the cells of individuals affected by neoplasms in the head and neck region, and studies on the care with this group of patients, were included. Therefore, articles that did not deal with neoplasm and the main complications of antineoplastic therapies were excluded. Neoplasm is a clonal disorder, caused by mutations, resulting from changes in the genetic structure of cells. Each healthy cell has instructions on how to grow and divi de. In the presence of any error in these instructions (mutation), it can result in a diseased cell that, when proliferating, may cause a tumor. Countless knowledge has been accumulated over the years on the main characteristics of neoplasms, whether they are cancer cell biology, carcinogenesis mechanism, neoplasms of the maxillofacial system and sequels of antineoplastic treatments. In this context, methods have been developed that offer a better quality of life for patients diagnosed with this pathology, as well as preventive vaccine models that may, in the not too distant future, contribute to this goal to be successfully achieved.

El presente estudio tuvo como objetivo revisar la literatura sobre las principales complicaciones de las terapias antineoplásicas y el grado de conocimiento de los odontólogos sobre este abordaje. Se realizó una búsqueda bibliográfica en las principales bases de datos de salud PUBMED (www.pubmed.gov) y Scholar Google (www.scholar.google.com.br), en la que se recopilaron estudios publicados entre 1987 y 2023. Fueron incluidos estudios de laboratorio, relatos de casos, revisiones de la literatura y revisiones sistemáticas, desarrolladas en individuos vivos, que incluyeran los principales genes neoplásicos y su relación con las células de individuos afectados por neoplasias en la cabeza y el cuello. También, se tuvieron en cuenta estudios relacionados con la atención a este grupo de pacientes. La neoplasia es un trastorno clonal, causado por mutaciones, como resultado de cambios en la estructura genética de las células. Cada célula sana tiene instrucciones sobre cómo crecer y dividirse. En presencia de cualquier error en estas instrucciones (mutación), puede provocar una célula alterada que, al proliferar, puede causar un tumor. Se han acumulado innumerables conocimientos a lo largo de los años sobre las principales características de las neoplasias, ya sea sobre biología de células cancerosas, el mecanismo de la carcinogénesis, la neoplasias del sistema maxilofacial y las diferentes secuelas de tratamientos antineoplásicos. En este contexto, se han desarrollado métodos que ofrecen una mejor calidad de vida para los pacientes diagnosticados con esta patología, así como modelos de vacunas preventivas que, en un futuro no muy lejano, pueden contribuir a alcanzar este objetivo con éxito.

Novo sistema de retentor pré-fabricado perfurado e de iluminador em fibra óptica: estudo da resistência mecânica frente a variação dos cimentos resinosos / New system of hollow prefabricated post and optical fiber illuminator: study of the mechanical strength by varying resin cements

O presente estudo teve por objetivo avaliar a resistência à flexão de um pino experimental de fibra de vidro vazado, e a resistência adesiva entre este pino experimental à dentina radicular, associando a utilização de um dispositivo iluminador em fibra óptica, sob o processo de envelhecimento, além de determinar a distribuição de tensão pela Análise de Elementos Finitos (FEA). O pino experimental e o dispositivo iluminador de fibra óptica têm por finalidade aumentar a efetividade de fotoativação dos cimentos resinosos nos terços médios e apicais dos canais radiculares. Para o teste de flexão de 3 pontos, estritamente do pino de fibra de vidro, as amostras foram divididas em 4 grupos (n=10): pino convencional (pc), pino experimental sem preenchimento (pp), com preenchimento de cimento resinoso (ppc) e com preenchimento de fibra óptica (ppf). Para o teste de resistência adesiva Pull-out, 100 raízes de dentes bovinos foram restauradas com retentores intrarradiculares e coroas de resina composta, distribuídos em 10 grupos (n=10), tendo como variáveis: o tipo de pino de fibra de vidro [convencional (C) ou perfurado (P)], o sistema de fotoativação [com ou sem o iluminador de fibra óptica (O)], o tipo de cimento resinoso [fotoativado (F) ou polimerização dual (D)] e o envelhecimento das amostras [com e sem ciclagem mecânica (C)]. O processo de envelhecimento foi realizado através da ciclagem mecânica e as amostras foram submetidas ao teste de resistência adesiva Pull-out. A análise do modo de falha foi realizada em Estereomicroscópio. A Análise em Elementos Finitos avaliou a distribuição de tensão pela análise de von Mises, deformação total e tensão máxima principal no Software Ansys 19.3. A análise estatística foi constituída pelo teste de normalidade Shapiro-Wilk, análise de variância (ANOVA) 1, 2 e 3 fatores e teste Tukey 5%. As médias e desvios padrão de resistência à flexão foram (MPa): pc = 677 ± 81,1; ppc = 419 ± 23,2; ppf = 200 ± 32,5 e pp = 177 ± 32,8. As médias e desvios padrão de resistência adesiva foram (MPa): CD = 12,2 ± 1,21; PD = 11,1 ± 1,32; PF = 10,9 ± 1,29; POD = 13,7 ± 1,16; POF = 11,9 ± 1,48; CDC = 10,1 ± 1,33; PDC = 9,25 ± 1,11; PFC = 8,37 ± 1,25; PODC = 10,8 ± 0,95 e POFC = 9,82 ± 1,02. Os resultados do modo de falha foram: adesiva entre pino e cimento (56%), mista predominantemente adesiva entre cimento e dentina (22%), adesiva entre cimento e dentina (14%) e a mista predominantemente adesiva entre pino e cimento (8%). Concluiu-se que entre os pinos experimentais, o grupo do pino perfurado preenchido com cimento resinoso obteve o maior valor de resistência à flexão, a utilização do dispositivo iluminador aumentou os resultados de resistência adesiva nos grupos dos pinos perfurados e não houve diferença na distribuição de tensões entre os grupos. (AU)

The present study aimed to evaluate the flexural strength of an experimental hollow glass fiber post, and the bond strength between this experimental post and root dentin, associating the use of an optical fiber illuminating device, under the aging process, in addition to determine the stress distribution by Finite Element Analysis (FEA). The experimental post and optical fiber illuminating device are intended to increase the polymerization effectiveness of resin cements in the middle and apical regions of root canals. For the 3-point bending test, strictly of the fiber post, the samples were divided into 4 groups (n=10): conventional post (pc), experimental post without filling (pp), with resin cement filling (ppc) and with optical fiber filling (ppf). For the Pull-out test, 100 roots of bovine teeth were restored with intraradicular retainers and composite resin crowns, distributed into 10 groups (n=10), with the following variables: glass fiber post type [conventional (C) or hollow (P)], the photocuring system [with or without the optical fiber illuminating device (O)], the type of resin cement [light cured (F) or dual cured (D)] and aging of the samples [with and without mechanical cycling (C)]. The aging process was performed by mechanical cycling and the samples were submitted to the Pull-out bond strength test. Failure mode analysis was performed using a stereomicroscope. Finite Element Analysis evaluated the stress distribution by von Mises analysis, total strain and maximum principal stress in Ansys Software 19.3. Statistical analysis consisted of the Shapiro-Wilk normality test, 1-, 2- and 3-way analysis of variance (ANOVA) and Tukey test 5%. The means and standard deviations of flexural strength were (MPa): pc = 677 ± 81.1; ppc = 419 ± 23.2; ppf = 200 ± 32.5 and pp = 177 ± 32.8. The means and standard deviations of bond strength were (MPa): CD = 12.2 ± 1.21; PD = 11.1 ± 1.32; PF = 10.9 ± 1.29; POD = 13.7 ± 1.16; POF = 11.9 ± 1.48; CDC = 10.1 ± 1.33; PDC = 9.25 ± 1.11; PFC = 8.37 ± 1.25; PODC = 10.8 ± 0.95 and POFC = 9.82 ± 1.02. The failure mode results were: adhesive between post and cement (56%), mixed predominantly adhesive between cement and dentin (22%), adhesive between cement and dentin (14%) and mixed predominantly adhesive between post and cement (8 %). It was concluded that among the experimental posts, the hollow post group filled with resin cement obtained the highest flexural strength value, the use of the illuminating device increased the results of bond strength in the hollow post groups and there was no difference in the stress distribution among the groups (AU)

Metal Alloys in Dentistry: An Outdated Material or Required for Oral Rehabilitation?

ABSTRACT: The present study aims to describe through a literature review, the main types of noble and non-noble alloys in dentistry looking to identify the adhesion mechanisms, compositions and mechanical properties, and its applicability as a rehabilitation resource nowadays. A bibliographic search was conducted in the main health databases PUBMED (www.pubmed.gov) and Scholar Google (www.scholar.google.com.br), in which studies published from 1971 to 2021 were collected. Laboratory studies, case reports, systematic and literature reviews, which were developed in living individuals. Articles that did not deal with metal alloys and its use in dentistry were excluded. Through the review, it was possible to ver ify that all works presented the metal alloys and their main properties, indicating that they are divided into three main types: hi gh noble alloys, noble alloys and base metal alloys differing in their levels of constituent noble metals. Several alloys and meta ls are available for the dental market each presenting advantages and disadvantages, mainly based on its specific composition.Continuous research and development are resulting in the production of new technologies and products, giving dental surgeons even more options in the design and manufacture of restorations using metal alloys and understanding that these resources will still be viable alternatives in oral rehabilitations. However, further studies on metal alloys are needed to better understand this subject.

RESUMEN: El presente trabajo tuvo como objetivo describir a través de una revisión de la literatura, los principales tipos de aleaciones nobles y no nobles utilizados en odontología buscando identificar los mecanismos de adhesión, composiciones y propiedades mecánicas, así como reflejar su aplicabilidad como recurso rehabilitador en la actualidad. Realizamos una búsqueda bibliográfica em las principales bases de datos de salud PUBMED (www.pubmed.gov) y Scholar Google (www.scholar.google.com.br), en la que se recopilaron estudios publicados desde 1971 hasta 2021. Estudios de laboratorio, informes de casos, revisiones sistemáticas y bibliográficas, que se desarrollaron en individuos vivos. Sin embargo, se excluyeron los artículos que no trataban sobre aleaciones metálicas y su uso en odontología. Se pudo observar que todos los trabajos presentaban las aleaciones metálicas y sus principales propiedades indicando que se estas dividen en tres tipos principales: aleaciones altamente nobles, aleaciones nobles y aleaciones de metales base que difierenen sus niveles de metales nobles constituyentes. Hay varias aleaciones y metales disponibles para el mercado dental, cada uno presenta ventajas y desventajas, principalmente en función de su composición específica. La investigación y el desarrollo continuo están dando como resultado la producción de nuevas tecnologías y productos, brindando a los cirujanos dentistas aún más opciones en el diseño y fabricación de las restauraciones, utilizando aleaciones metálicas y, permite concluir que estos recursos seguirán siendo alternativas viables en los tratamientos de rehabilitación. Sin embargo, se necesitan más estudios sobre el tema abordado en el trabajo, para una comprensión más profunda del tema.

Characterization of Bulk-Fill Resin Composites in Terms of Physical, Chemical, Mechanical and Optical Properties and Clinical Behavior

ABSTRACT: This study aims to evaluate the physical, chemical, mechanical and optical properties of Bulk-Fill resin, in relation to the literature and its proper clinical uses. A bibliographic search was performed in the main health databases PUBMED (www.pubmed.gov) and Scholar Google (www.scholar.google.com.br), in which articles published from 1994 to 2020 were collected. Laboratory studies, case reports, systematic reviews and literature reviews, which were developed in living individuals, were included. Therefore, articles that did not deal with the characteristics of the Bulk-Fill resin and its proper clinical uses were excluded. The use of Bulk-Fill resin has been progressively increasing over the years, presenting good properties, achieving success in clinical performance, ease of handling and thus has become the material of choice for dentists. In addition, its longevity demonstrates durability with mechanical properties and resistance to tooth structure. Bulk - Fill resins have characteristics similar to traditional composite resins, when performed according the usage protocol. With the use of this group of resins in a single increment, possible failures that occur during the restorative procedure can be minimized, such as: less chance of incorporating bubbles and a volumetric contraction with less stress on the interface.

RESUMEN: Este estudio tuvo como objetivo evaluar las propiedades físicas, químicas, mecánicas y ópticas de la resina Bulk-Fill, en relación con la literatura y sus usos clínicos apropiados. Realizamos una búsqueda bibliográfica en las bases de datos de salud PUBMED (www.pubmed.gov) y Scholar Google (www.scholar.google.com.br), en la que se recopilaron trabajos que se publicaron entre 1994 y 2020. Fueron incluidos estudios de laboratorio, informes de casos, revisiones sistemáticas y revisiones de literatura, desarrollados en individuos vivos. Por tanto, se excluyeron los artículos que no trataban las características de la resina Bulk-Fill y sus usos clínicos adecuados. El uso de la resina Bulk-Fill ha ido aumentando progresivamente a lo largo de los años, presentando buenas propiedades, logrando éxito en el rendimiento clínico, facilidad de manejo y, por lo tanto, se ha convertido en el material elegido por los dentistas. Además, su longevidad demuestra durabilidad, con propiedades mecánicas y resistencia a la estructura dental.Las resinas Bulk-Fill tienen características similares a las resinas compuestas tradicionales, cuando se realizan siguiendo el protocolo de uso. Con el uso de este grupo de resinas mono incremental, es posible eliminar el paso de varios incrementos, disminuyendo a su vez el tiempo clínico. Además, se pueden minimizar las posibles fallas que se producen durante el procedimiento de restauración, tales como: menos posibilidades de incorporar burbujas y una contracción volumétrica con menos estrés en la interfaz.

Microhardness and Diametral Compression Strength of Single Fill Composite

ABSTRACT: To evaluate Knoop microhardness and diametral compression strength at different polymerization times. A total of 80 cylindrical samples with Filtek resin™ One Bulk Fill were made to perform the in vitro study, using half of total samples (n=40) for each test and divided equally between groups (n=10). All samples were made according to ISO 4049 using 2 mm thickness Teflon matrix and a central orifice with 4 mm diameter. Four different times of light-curing in Standard mode suggested by the light-unit manufacturer were selected, therefore, group 1 samples (G1) were light-cured for 5 seconds; group 2 (G2) for 10 seconds; group 3 (G3) for 15 seconds, and group 4 (G4) for 20 seconds. A radiant display, which means a power in mW/cm2 by time in seconds was expressed in Joules (J). The samples were stored in a dark container with distilled water at a temperature of 37°C for 48 hours before testing. One-way analysis of variance (ANOVA) with T-Test (LSD) of multiple comparisons of the mean values of Knoop hardness and diametral compression strength was performed, with significance index α=0.05. Regarding the Knoop microhardness test, G1 (35.73 ± 6.2) presented the lowest values, followed by G2, while G3 and G4 did not present statistical differences between them. For the diametral compression test, G1 (1387.76 ± 190.51) obtained the lowest value when compared to the other groups. G2, G3, and G4 did not present significant statistical differences. The different polymerization times influenced the Knoop microhardness and the diametral compression strength of Bulk Fill resin.

RESUMEN: El objetivo de este trabajo fue evaluar la microdureza Knoop y la resistencia a la compresión diametral en diferentes tiempos de polimerización. En el estudio realizado in vitro, se analizó un total de 80 muestras cilíndricas con la resina Filtek™ One Bulk Fill, utilizando la mitad (n=40) para cada prueba realizada y dividida en partes iguales entre los grupos (n=10). Todas las muestras se tomaron de acuerdo con ISO 4049 utilizando matrices de teflón de 2 mm de espesor y orificio central con 4 mm de diámetro. Se seleccionó cuatro veces el fotocurado de manera estándar, sugerido por el fabricante. Por lo tanto, las muestras del grupo 1 (G1) se fotopolimerizaron durante 5 segundos; grupo 2 (G2) durante 10 segundos; grupo 3 (G3) durante 15 segundos y grupo 4 (G4) durante 20 segundos. La exposición radiante, que indica la potencia en mW / cm2 a lo largo del tiempo en segundos, se expresó en julios (J). Las muestras se almacenaron en un recipiente oscuro con agua destilada en una estufa a una temperatura de 37°C durante 48 horas antes del ensayo. Se realizó para comparaciones múltiples de los valores medios, análisis de varianza (ANOVA) de un criterio con la prueba T (LSD) tanto de la dureza de Knoop como de la compresión diametral con un índice de significación α=0.05. Con respecto a la prueba de microdureza de Knoop, G1 (35,73 ± 6,2) tuvo los valores más bajos, seguido de G2, mientras que G3 y G4 no mostraron diferencias estadísticas entre ellos. Para la prueba de compresión diametral, G1 (1387.76 ± 190.51) obtuvo el valor más bajo en comparación con los otros grupos. G2, G3 y G4 no presentaron diferencias estadísticamente significativas. Los diferentes tiempos de polimerización influyeron en la microdureza de Knoop y la resistencia a la compresión diametral de la resina compuesta mono incremental.

Homogenous Bone Grafts as an Alternative in Oral Rehabilitation Treatments with Dental Implants / Los Injertos Óseos Homogéneos como una Alternativa en los Tratamientos de Rehabilitación Oral con Implantes Dentales

ABSTRACT: The present study aims to describe, through a case report, the functioning of bone grafts, where they are obtained including bone banks and the different dental areas in which it is used. A 50-year.old female patient HMR, sought the postgraduate college of dentistry CECAPE for oral rehabilitation. The initial clinical examination revealed the absence of several dental elements in both the maxilla and mandi ble, bone resorption in the entire maxillary extension where there was an absence of elements in the anterior region and the presence of a torus in the palatal region. Initial tomographic examinations of the maxilla and mandible were performed, looking for the best conduct regarding the diagnosis and planning of the case. After the clinical and radiographic examinations was performed, and the diagnosis was reached, it was determined as a treatment for oral rehabilitation of the maxilla, bone grafting and an Implant-supported Removable Partial Prosthesis and for the mandible a Dento-muco-supported Removable Partial Prosthesis. Dental treatments and oral rehabilitation from the use of bone tissues and bone grafting have become commonly used. Procedures that would normally lead to failure started to increase the percentage of successes due to the use of these biomaterials. The use of bone grafts in dentistry has been shown to be a very effective and useful resource, considering its great applicability in bone reconstructions in different areas of dentistry.

RESUMEN: El presente estudio tiene como objetivo describir a través de un informe de caso, el funcionamiento de los injertos óseos, donde se obtienen, incluidos los bancos de huesos y las diferentes áreas dentales en las que se emplea. Una paciente HMR, de 50 años de edad, asistió el centro universitario de posgrado CECAPE para rehabilitación oral. El examen clínico inicial reveló la ausencia de varios dientes tanto en el maxilar como en la mandíbula, la resorción ósea en toda la extensión maxilar donde había ausencia de dientes en la región anterior y la presencia de un torus en la región palatina. Se realizaron exámenes tomográficos iniciales del maxilar y mandíbula, buscando la mejor conducta con respecto al diagnóstico y la planificación del caso. Después de los exámenes clínicos y radiográficos realizados y el diagnóstico listo, se determinó como un tratamiento para la rehabilitación oral del maxilar, el injerto óseo y una prótesis removible implantosoportada y para la mandíbula una prótesis parcial removible dento-muco-soportada. Los tratamientos dentales y la rehabilitación oral a partir del uso de tejidos óseos y el injerto óseo se han utilizado comúnmente. Los procedimientos que normalmente conducirían al fracaso comenzaron a aumentar el porcentaje de éxitos debido al uso de estos biomateriales. Se ha demostrado que el uso de injertos óseos en odontología es un recurso muy eficaz y útil, considerando su gran aplicabilidad en las reconstrucciones óseas en diferentes áreas de la odontología.

Considerações Atuais Quanto as Cerâmicas Odontológicas e Seus Respectivos Sistemas de União / Current Considerations for Dental Ceramics and Their Respective Union Systems

Objetivo: avaliar as principais caracteristicas das cerâmicas odontológicas, cimentos resinosos, tratamentos de superfície e verificação dos seus devidos modos de falha, frente à literatura e suas respectivas utilizações clínicas. Material e Métodos: foi realizada uma busca bibliográfica nos principais bancos de dados de saúde PUBMED (www.pubmed.gov) e Scholar Google (www.scholar.google.com.br), no qual coletou-se trabalhos que foram publicados de 2002 a 2020. Foram inclusos estudos laboratoriais, relatos de casos, revisões sistemáticas e revisões de literatura, que fossem desenvolvidos em indivíduos vivos. Logo, foram excluídos artigos que não tratavam a respeito das caracteristicas das cerâmicas odontológicas, cimentos resinosos, tratamentos de superfície e verificação dos seus devidos modos de falha, frente à literatura e suas respectivas utilizações clínicas. Resultados: as cerâmicas podem ser classificadas em cerâmicas vítreas, cerâmicas policristalinas e as cerâmicas híbridas. Do mesmo modo que existem diferentes composições das cerâmicas e agentes de união, há também alguns protocolos de tratamento de superfície que se diferem de acordo com a escolha desses materiais. Conclusão: diversos sistemas cerâmicos estão disponíveis no mercado, fazendo com que os profissionais da área protética necessitem de uma constante reciclagem acerca das suas propriedades e indicações, visto que bons resultados não são devidos exclusivamente ao tipo de material utilizado, mas sim, à seleção do melhor material, tipo de preparo em conjunto à habilidade do profissional, cimentos resinosos, tratamentos de superfície e verificação dos seus devidos modos de falha. Nesse contexto, fazem-se necessários maiores estudos com relação às cerâmicas odontológicas e seu devido uso em um cenário clínico

Objective: to evaluate the main characteristics of dental ceramics, resin cements, surface treatments and verification of their failure modes, in relation to the literature and their respective clinical uses. Material and Methods: a bibliographic search was conducted in the main health databases PUBMED (www.pubmed.gov) and Scholar Google (www.scholar.google.com.br), in which studies published from 2002 to 2020 were collected. Laboratory studies, case reports, systematic and literature reviews, which were developed in living individuals, were included. Therefore, articles that did not deal with the main characteristics of dental ceramics, resin cements, surface treatments and verification of their failure modes, in relation to the literature and their respective clinical uses were excluded. Results: ceramics can be classified into glass-matrix ceramics, polycrystalline ceramics and hybrid ceramics. Just as there are different compositions of ceramics and bonding agents, there are also some surface treatment protocols that vary according to the choice of these materials. Conclusion: several ceramic systems are available, making professionals in the prosthetic area need a constant update about their properties and indications, since good results are not due exclusively to the type of material used, but also to the selection of the best material, type of preparation, professional's skill, resin cements, surface treatments and verification of their failure modes. In this context, further studies are needed in relation to dental ceramics and their proper clinical use

Influência do Condicionamento Ácido na Resistência de União entre Cerâmica Feldspática e Cimento Resinoso / Influence of Acid Etching on Bond Strength Between Feldspathic Ceramics and Resin Cement

Objetivo: Analisar a influência da resistência de união entre cimento resinoso e cerâmica feldspática utilizando concentrações e tempos de aplicação diferentes de acído fluorídrico (HF). Material e Métodos: Foram confeccionados 18 discos de cerâmica feldspática (Ø10mm - 2mm de espessura) através da técnica incremental, que foram incluídos em resina acrílica e regularizados com lixas de carbeto de silício com granulações de 600, 1200 e 2000 através de uma máquina de polimento com velocidade de 600 rpm para regularização. Logo após foram mergulhadas em água destilada durante 10 minutos em cuba ultrassônica. Todos corpos de prova foram condicionados com HF e silanizados. Foram confeccionados quatro cilindros de cimento sobre cada corpo de prova (n=12), feitos com cimento resinoso Relyx ARC. Logo após, dividiu-se em seis grupos de acordo com o protocolo de tratamento de superfície: G1 (5% - 40s); G2 (5% - 60s); G3 (5% - 80s); G4 (10% - 40s); G5 (10% - 60s) e G6 (10% - 80s). Os corpos de prova foram submetidos ao Teste de Microcisalhamento, com força vertical a uma velocidade de 0,5 mm/min sobre a peça. A resistência de união ao microcisalhamento foi calculada e expressa em Megapascal (MPa). Os dados foram submetidos à análise de variância (ANOVA) dois fatores e para comparações múltiplas foi utilizado o Teste de Tukey, sendo o nível de significância de 5%. Resultados: Quando analisado a concentração do HF, não houve diferenças estatísticas (p>0,05). Na comparação dos tempos de aplicação, G3 (5% - 80s) e G6 (10% - 80s) obtiveram maiores resultados de resistência ao microcisalhamento que os demais grupos. Conclusão: As diferentes concentrações de HF não influenciaram na resistência de união entre cerâmica feldspática e cimento resinoso. Já o aumento do tempo de condicionamento com HF afetou na resistência de união

Objective: analyze the influence of bond strength between resin cement and feldspathic ceramics using different concentrations and application times of hydrofluoric acid (HF). Materials and Methods: 18 feldspathic ceramic discs (Ø10mm - 2mm thickness) were made through the incremental technique, which were included in acrylic resin and regularized with silicon carbide sandpaper with granulations of 600, 1200 and 2000 through a polishing machine with a speed of 600 rpm. Soon after, they were immersed in distilled water for 10 minutes in an ultrasonic bath. All specimens were conditioned with HF and silanized. Four cement cylinders were made on each specimen (n=12), manufactured with Relyx ARC resin cement. After that, it was divided into six groups according to the surface treatment protocol: G1 (5% - 40s); G2 (5% - 60s); G3 (5% - 80s); G4 (10% - 40s); G5 (10% - 60s) e G6 (10% - 80s). The specimens were subjected to the Microshear Test, with vertical force at a speed of 0.5 mm min on the specimen. The microshear bond strength was calculated and expressed in Megapascal (MPa). The data were submitted to two-way analysis of variance (ANOVA) and Tukey's test for multiple comparisons, with a significance level of 5%. Results: when the concentration of HF was analyzed, there were no statistical differences (p>0.05). In the comparison of application times, G3 (5% - 80s) and G6 (10% - 80s) obtained higher results of microshear resistance than the other groups. Conclusion: The different concentrations of HF did not influence the bond strength between feldspathic ceramics and resin cement. However, the increase in the time of HF conditioning affected in the bond strength.

Evaluation of coronally advanced flap in ''l'' associated with subepithelial connective tissue graft in the treatments of Miller's class i and ii gingival recessions / Evaluación de colgajo coronalmente avanzado en ''l'' asociado con injerto subepitelial de tejido conectivo en el tratamiento de recesiones gingivales de clases I y II de Miller

To evaluate clinically the results of two surgical techniques used for root coverage, the coronally advanced flap in '' L '' isolated (CAF) or associated with subepithelial connective tissue graft (SCTG). The surgical procedures were performed in seventeen individuals, ten individuals in the control group (coronally advanced flap in "L") and seven individuals in the test group (coronally advanced flap in "L" associated with SCTG), who presented Miller class I and II gingival recession. The depth gingival recession (GR) index was evaluated in the following periods: immediate preoperative and 180 postoperative days. The control group had a success rate of 85 +/- 18 % and the test group had a success rate of 95 +/- 4 %. The variable success rates (p=0.36) did not present a statistically significant difference. The isolated CAF or its association with SCTG showed favorable outcomes in the treatments of Miller's class I and II gingival recessions.

El objetivo fue evaluar clínicamente los resultados de dos técnicas quirúrgicas utilizadas para la cobertura radicular, el colgajo coronalmente avanzado en "L" aislado (CAF) o asociado con injerto de tejido conectivo subepitelial (SCTG). Los procedimientos quirúrgicos se realizaron en diecisiete individuos, diez individuos en el grupo de control (colgajo coronario avanzado en "L") y siete individuos en el grupo de prueba (colgajo coronalmente avanzado en "L" asociado con SCTG), que presentaron la clase I de Miller y II recesión gingival. El índice de recesión gingival profunda (RG) se evaluó en los siguientes períodos: preoperatorio inmediato y 180 días postoperatorios. El grupo de control tuvo una tasa de éxito de 85 +/- 18 % y el grupo de prueba tuvo una tasa de éxito de 95 +/- 4 %. Las tasas de éxito variables (p = 0,36) no presentaron una diferencia estadísticamente significativa. La CAF aislada o su asociación con SCTG mostraron resultados favorables en los tratamientos de las recesiones gingivales de clase I y II de Miller.